[ic] Debian problems

[Víctor Romero]

> Have you installed the tar.gz package or the debian package?
	
	The deb package, I always try to use the deb package before any other thing...

>
> > 			No responseWe're sorry, the Interchange server is unavailable... We
> > are out of service or may be experiencing high system demand, please try
> > again soon.
>
> Thats a FAQ -> go to developer.akopia.com and search for it.
>
> > 		So, dont know wheres the problem ;'(
>
> Hint: look at the permission of the cgi binary...

	The strange thing about this is the faq page doenst work... but a search of "unavailable" return this :


We're sorry, the Interchange server is unavailable... 

(The following assumes that you were able to start the Interchange server.) 

This could be almost anything, but with a properly configured Interchange it is almost undoubtedly due to your cgi-bin and/or your Interchange directory being located on a different filesystem than the actua machine that is executing the program. VLINK uses UNIX-domain sockets, which don't work on NFS-mounted filesystems. 

Iserver.com and other systems which use chroot HTTP servers require quite a bit of extra configuration to get going. If you have not been careful to set permissions properly when running in VLINK/UNIX mode, the link CGI will not be able to communicate with the Interchange server. Please read the documentation that covers this in detail. 

You can run in INET mode with the tlink link program to prevent those problems. 


	So Im still at the beggining, Im sure the cgi permisions are ok, and I have just a root partition, and a /boot partition, so the partitions and nfs shouldnt be the problem.

	In the other side I have that may be interchange server are not correctly running, but :

victor@kenny:~$ ps aux | grep interchange
108        363  0.0  0.4 16888  556 ?        S    17:31   0:00 interchange
victor    2602  0.0  0.5  1616  700 pts/2    S    21:24   0:00 grep interchange


	I think im going to install it from the tgz package :(