[ic] CyberCash Decryption Error

Billy J. Mayberry interchange-users@icdevgroup.org
Fri Jan 17 16:23:00 2003


----- Original Message -----
From: "Matt Kerner" <mkerner@showmeinteractive.com>
To: <interchange-users@icdevgroup.org>
Sent: Friday, January 17, 2003 2:15 PM
Subject: [ic] CyberCash Decryption Error


> I've jumped through many hurdles trying to get cybercash working and
> this is the latest.
>
> Encryption apparently works fine as the current error is:
>    (cybercash): Charge failed, reason: Location: CCMckDirectLib3_2;
> Message: Decryption failed
>
> Here is what I have done so far:
> 1. Install MCK 3.2.0.4
> 2. Make required changes to .pm files
> 3. Make changes to the catalog.cfg (pointing to the merchant file)
> 4. Replace the MCKencrypt & MCKdecrypt binaries with binaries from the
> MCK 3.2.0.6 (the older ones don't run under RedHat 7.2 and newer).
> 5. Restart Interchange
> 6. Place an order with the test (4111111111111111) credit card number
> 7. Error message above.
>
> Migrating this client from CyberCash is not an option.  Has anybody
> seen this error before?  Is there any solution?
>
> Thanks,
> Kerner
>
> _______________________________________________
> interchange-users mailing list
> interchange-users@icdevgroup.org
> http://www.icdevgroup.org/mailman/listinfo/interchange-users
>
>

I have seen this error usually on the encyrpt part.  If you go to our demo
store at http://secure.thecomputercorner.com/demo2 and place an order it
will do everthing this is on a rh 8.0 and ic 4.9.3 and cybercash 3.2.0.4 and
it works fine.  I had the same problem with the newer versions of cybercash
and it was will the encyrpt not decyrpt.

If you need some help call me at 740-383-4919 ext 10 and I can walk you
through what we had to do.

But it works fine on our end.

Hope this will help...

Bill