[ic] IC 5.6.0 to 5.6.3 Post Form Fails with 500 Server Error

Gert van der Spoel gert at 3edge.com
Fri Apr 8 06:21:35 UTC 2011


> -----Original Message-----
> From: interchange-users-bounces at icdevgroup.org [mailto:interchange-users-
> bounces at icdevgroup.org] On Behalf Of IC
> Sent: vrijdag 8 april 2011 1:53
> To: interchange-users at icdevgroup.org
> Subject: Re: [ic] IC 5.6.0 to 5.6.3 Post Form Fails with 500 Server Error
> 
> > -----Original Message-----
> > From: interchange-users-bounces at icdevgroup.org [mailto:interchange-
> users-
> > bounces at icdevgroup.org] On Behalf Of Stefan Hornburg (Racke)
> > Sent: Thursday, April 07, 2011 3:35 PM
> > To: interchange-users at icdevgroup.org
> > Subject: Re: [ic] IC 5.6.0 to 5.6.3 Post Form Fails with 500 Server
> Error
> >
> > On 04/07/2011 02:40 PM, TVCables Sales wrote:
> > > Hi folks,
> > >
> > > I recently trialled our main catalog on IC 5.6.3 (from 5.6.0) and
> found
> > that
> > > one legacy order profile failed that uses a form post to Paypal.
> > >
> > > The profile uses mv_order_receipt to load an html page as below that
> > posts a
> > > form,
> > >
> > > <body onLoad="paypal.submit()">
> > > <form name="paypal" action="https://www.paypal.com/cgi-bin/webscr"
> > > method="post">
> > > <input type=hidden name="some variable" value="some value">
> > > .
> > > .
> > > .
> > > .
> > > </form>
> 
> Hi Folks,
> 
> Well after some more hours looking at this I realised I had switched to
> high
> traffic settings in interchange.cfg whilst using 5.6.3, now I have
> reverted
> to low this order profile works again, but why would it throw a 500 server
> error when in high traffic mode??
> 
> my settings are
> 
> ifdef TRAFFIC =~ /low/i
> Message Low traffic settings.
> HouseKeeping 3
> MaxServers   0
> PIDcheck     300
> endif
> 
> ifdef TRAFFIC =~ /high/i
> Message High traffic settings.
> HouseKeeping 2
> MaxServers   10
> PIDcheck     120
> endif

Did you try to put your 'low' settings in the 'high' definition , to see if
it then would still work?  (so making 'high' exactly as 'low' in de config).

CU,

Gert





More information about the interchange-users mailing list