[ic] Mike - Need a little help

[Robert Trembath]

Dan,
I apologize for the lengthy introduction to what I need and you answered one
of my questions about running two versions of IC on the same server.

One of my problems is getting Authorize.net to work in 4.7.5. I been told
its quite different from 4.6.5. Do we just add the same variables for
authorize.net to the catalog.cfg file? Which globalsub do we point to as
I've been told that there is just one for all services now?

Thx,
Robert
----- Original Message -----
From: "Dan Browning" <db@cyclonehq.dnsalias.net>
To: <interchange-users@developer.akopia.com>
Sent: Tuesday, July 17, 2001 6:23 PM
Subject: Re: [ic] Mike - Need a little help


> At 03:14 PM 7/17/2001 -0500, you wrote:
> >Mike or Anyone Who Knows,
> >     I'm working with converting 8 of my existing IC stores from 4.6.5 to
the
> >4.7.5 base. I've successfully done this with the first store but have a
> >couple of questions that I've been unable to resolve.
> >
> >My configuration is running on a Dell PowerEdge 1550 with Dual 933's, 1GB
of
> >RAM, and RAID5 using RH 7.0, Apache, MySQL, Perl 5.6 and all Interchange
> >modules up-to-date. I currently have IC 4.6.5 installed and running fine
> >with Authorize.net.
> >
> >I want to install IC 4.7.5 on the same machine but only run one or the
other
> >at any given time. I WANT TO BE ABLE TO PHASE FROM MY DEVELOPMENT SERVER
> >WHICH HAS THE IC 4.7.5 VERSION OF OUR STORE TO MY PRODUCTION SERVER FOR
> >TESTING WITH AUTHORIZE.NET.
> >
> >I also need to know where to add the payment variables for authorize.net.
I
> >know that I can do this in the wizard on the Admin but it changes other
> >things in the site that I don't wish to change. What variables and to
what
> >files does the wizard make changes to to add authorize.net integration.
I've
> >been told it has been changed quite a bit from IC 4.6.x
> >
> >We're also working directly with Con-way freight  and RH to implement a
> >ground-freight carrier solution module for shipping. We plan to forward
this
> >to you RH guys ( and the list, if anyone's interested ) for possible
> >inclusion in Interchange.
> >
> >Thanks for any help in advance. IC and this list have been the primary
key
> >for my switching to open source software from more than 8 years of
running
> >exlusively MS products. Thanks for all the support guys ( and any gals
out
> >there )!
> >
> >Robert Trembath
> >CTO
> >iShop Technologies
> >e| robert@ishoptech.com
>
> Sorry Robert, even after reading all that, I wasn't sure what your exact
> question was.  If you are asking about running a 4.7.x version along side
a
> 4.6.x version, it is easy.  They can be run at the same time, but if you
> want to run them separately that's fine too.
>
> install 4.6.5 to /usr/local/ic4.6.5
> install 4.7.5 to /usr/local/ic4.7.5
>
> You can configure both of them in interchange.cfg with the same Catalog
> line to use
>
> Catalog         construct       /var/.../construct /cgi-bin/construct
>
> and then start them with /usr/local/ic4.6.5/bin/interchange -r and
> /usr/local/ic4.6.5/bin/interchange -r respectively.
>
> I like to use symlinks to make the starting easier:
>
> ln -s /usr/local/ic4.6.5 /usr/local/ic
>
> So that I can just change the symlink when I want to specify which version
> of ic I'm currently using, and specify the symlink (/usr/local/ic) in my
> start/stop scripts (or the init.d/... if your an RPM kind of guy).
>
> But maybe I misunderstood your question.  At any rate, that shipping stuff
> looks like a neat contribution.
>
> Dan Browning, Cyclone Computer Systems, danb@cyclonecomputers.com
>
> _______________________________________________
> Interchange-users mailing list
> Interchange-users@lists.akopia.com
> http://lists.akopia.com/mailman/listinfo/interchange-users
>