[ic] problem opening website
Paul Arnold
arnman at cox-internet.com
Tue Nov 30 09:02:21 EST 2004
I ran ps aux and I got a whole list of stuff
here is a section of it where I found IC
root 3609 0.0 4.3 27176 11092 ? S Nov29 0:01
/usr/bin/python /
root 3642 0.0 0.2 3764 612 ? Ss Nov29 0:00
xinetd -stayalive
interch 4188 0.0 11.4 34776 29164 ? Ss 00:06 0:00 interchange
root 4970 0.0 1.7 11568 4380 ? S 04:02 0:00
/usr/sbin/snmpd -
root 5508 0.1 0.8 7576 2080 ? Ss 07:40 0:00 sshd:
root at pts/3
root 5510 0.0 0.3 3976 1016 ? Ss 07:40 0:00
/usr/libexec/open
root 5517 0.3 0.5 5744 1376 pts/3 Ss 07:40 0:00 -bash
root 5549 0.0 0.3 3024 768 pts/3 R+ 07:40 0:00 ps aux
and it is ran by interch
there has to be something the I need to chmod or do something too.
>>I tried those two and they didn't work, here is what I got on the first
>>one
>>[root at localhost ~]# /etc/init.d/interchange status
>>-bash: /etc/init.d/interchange: No such file or directory
>
> Unless you have created your own start-up script you won't
> have one (unless the rpm installs one?) These scripts are also
> to be found in /etc/rc.d/init.d.
>
>>and the second one
>>[root at localhost ~]# ps -aux |grep interchange
>>Warning: bad syntax, perhaps a bogus '-'? See
>
> Try just 'ps aux' or 'ps ax', though the result below shows it running.
>
>>/usr/share/doc/procps-3.2.3/FAQ
>>interch 3249 0.0 11.4 35588 29164 ? Ss Nov29 0:00 interchange
>>root 4174 0.0 0.2 4740 656 pts/3 S+ 00:03 0:00 grep
>>interchange
>>
>>so I restarted it and here is what it gave me
>>
>>[root at localhost ~]# su -f -c /usr/local/interchange/bin/restart interch
>>Killing Interchange server 4180 with TERM.
>>Low traffic settings.
>>Calling UI......UI is loaded...
>>Interchange V5.3.0-200411290658
>>Running with new signals, external programs could be unreliable.
>>Re-run with environment variable PERL_SIGNALS set to "unsafe" to change
>>this.
>>Configuring catalog mystore...Using MySQL,
>>DSN=dbi:mysql:test_mystore...done.
>>Interchange server started in UNIX mode(s) (process id 4188)
>>
>>As far as I can tell the server is running from what I am seeing
>>I still can go into the customer and admin entrance page, but I get the
>>normal We're sorry after that
>
> Try changing your cgi link mode to 4755, and if that's no good
> try just 755 - depending on your setup it may or may not need to
> be suid. And ensure that it's owned by the Interchange user.
> Also, you really should set your PERL_SIGNALS to unsafe as
> the startup message suggests, else you will get all sorts of
> intermittent and otherwise inexplicable failures. Adding:
> $ENV{PERL_SIGNALS} = "unsafe";
> into the top of bin/interchange, just after the #!/usr/bin/perl, will
> do the trick.
>
>>Paul
>
> HTH
>
> -
> Cheers
> Lyn St George
> +-----------------------------------------------------------------------------------
> + http://www.zolotek.net eCommerce: develop, host, support
> +-----------------------------------------------------------------------------------
>
> _______________________________________________
> interchange-users mailing list
> interchange-users at icdevgroup.org
> http://www.icdevgroup.org/mailman/listinfo/interchange-users
More information about the interchange-users
mailing list