[ic] problem opening website

Paul Arnold arnman at cox-internet.com
Tue Nov 30 09:08:57 EST 2004

Ok, I chmod to 4755 and also 755 still nothing, and I also have inserted the 
unsafe perl into bin/interchange here is my restart

[root at localhost bin]# su -f -c /usr/local/interchange/bin/restart interch
Killing Interchange server 4188 with TERM.
Low traffic settings.
Calling UI......UI is loaded...
Interchange V5.3.0-200411290658
Running with old signals.
Configuring catalog mystore...Using MySQL, 
Interchange server started in UNIX mode(s) (process id 5597)
[root at localhost bin]#

I will check out my error log and restart and see if something new pops up


>>I tried those two and they didn't work, here is what I got on the first 
>>[root at localhost ~]# /etc/init.d/interchange status
>>-bash: /etc/init.d/interchange: No such file or directory
> Unless you have created your own start-up script you won't
> have one (unless the rpm installs one?) These scripts are also
> to be found in /etc/rc.d/init.d.
>>and the second one
>>[root at localhost ~]# ps -aux |grep interchange
>>Warning: bad syntax, perhaps a bogus '-'? See
> Try just 'ps aux' or 'ps ax', though the result below shows it running.
>>interch   3249  0.0 11.4 35588 29164 ?       Ss   Nov29   0:00 interchange
>>root      4174  0.0  0.2  4740  656 pts/3    S+   00:03   0:00 grep
>>so I restarted it and here is what it gave me
>>[root at localhost ~]# su -f -c /usr/local/interchange/bin/restart interch
>>Killing Interchange server 4180 with TERM.
>>Low traffic settings.
>>Calling UI......UI is loaded...
>>Interchange V5.3.0-200411290658
>>Running with new signals, external programs could be unreliable.
>>Re-run with environment variable PERL_SIGNALS set to "unsafe" to change
>>Configuring catalog mystore...Using MySQL,
>>Interchange server started in UNIX mode(s) (process id 4188)
>>As far as I can tell the server is running from what I am seeing
>>I still can go into the customer and admin entrance page, but I get the
>>normal We're sorry after that
> Try changing your cgi link mode to 4755, and if that's no good
> try just 755 - depending on your setup it may or may not need to
> be suid. And ensure that it's owned by the Interchange user.
> Also, you really should set your PERL_SIGNALS to unsafe as
> the startup message suggests, else you will get all sorts of
> intermittent and otherwise inexplicable failures. Adding:
> $ENV{PERL_SIGNALS} = "unsafe";
> into the top of bin/interchange, just after the #!/usr/bin/perl, will
> do the trick.
> -
> Cheers
> Lyn St George
> +-----------------------------------------------------------------------------------
> + http://www.zolotek.net  eCommerce: develop, host, support
> +-----------------------------------------------------------------------------------
> _______________________________________________
> interchange-users mailing list
> interchange-users at icdevgroup.org
> http://www.icdevgroup.org/mailman/listinfo/interchange-users 

More information about the interchange-users mailing list